BLVMN - PRESTONE HEAVY DUTY BRAKE FLUID, AS403

  • MSDS: BLVMN
  • Manufacturer: FIRST BRANDS CORP
  • Product Name: PRESTONE HEAVY DUTY BRAKE FLUID, AS403
  • National Stock Number: 9150-00N020229
Product Identification

Product ID:PRESTONE HEAVY DUTY BRAKE FLUID, AS403
MSDS Date:12/19/1988
FSC:9150
NIIN:00N020229
MSDS Number: BLVMN

Responsible Party
FIRST BRANDS CORPORATION
83 WOOSTER HEIGHTS ROAD
DANBURY, CT 06813-1911
US

Emergency Phone: 203-731-2300;800-424-9300(CHEMTREC)

Info Phone: 203-731-2300

Preparer: P C ZAZZARO

Cage: DO273

Contractor
PRESTONE PRODUCTS CORP
DANBURY, CT 06810-5109 US

Telephone: 203-731-3686/830-7865

Cage: 0CXZ7

Ingredients

DIETHYLENE GLYCOL

CAS: 111-46-6

RTECS: ID5950000


POLYETHYLENE GLYCOL

CAS: 25322-68-3

RTECS: TQ3500000

OSHA PEL 10 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)


POLYALKYLENE GLYCOL ETHERS


CORROSION INHIBITOR

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST:MAY CAUSE NAUS.SKIN ABSORP:NO
EVIDENCE OF ADVERSE EFTS FROM AVAIL INFO. INHAL:NO EVIDENCE OF
ADVERSE EFTS FROM AVAIL INFO. SKIN:NO EVIDENCE OF ADVERSE EFTS FROM
AVAIL INFO. EYE:MAY CAUSE IRRIT, SEEN AS EXCESS REDNESS & POSS
SWELLINGOF CONJUNCTIVA. EFTS OF RPTD OVEREXP:NO EVIDENCE OF
ADVERSE(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:EFTS FROM AVAIL INFO. OTHER EFTS OF
OVEREXP:OVEREXP TO VAPS GENERATED AT HIGH TEMPS MAY RESULT IN EYE &
RESP TRACT IRRIT & IN INHAL OF HARMFUL AMTS OF MATL. THIS PROD MAY
CONTAIN A SECONDARY AMINE WHICH MAY REACT W/NITRITES TO FORM
NITROSAMINES. SOME NITROSAMINES HAVE BEEN SHOWN TO BE CARCIN IN LAB
ANIMALS.
Medical Cond Aggravated by Exposure:A KNOWLEDGE OF THE AVAILABLE
TOXICOLOGY INFORMATION AND OF THE PHYSICAL AND CHEMICAL PROPERTIES
OF THE MATERIAL SUGGEST THAT OVEREXPOSURE IS UNLIKELY TO AGGRAVATE
EXISTING MEDICAL CONDITIONS.

First Aid

First Aid:INGEST:IF SIGNIFICANT QTY HAS BEEN SWALLOWED, GIVE AT LEAST 2
GLASSES OF MILK/WATER & INDUCE VOMIT, UNLESS PATIENT IS UNCON. CALL
MD. SKIN:WASH WITH SOAP & WATER. INHAL:REMOVE TO FRESH AIR.
EYES:FLUSH THORO WITH WATER FOR AT LEAST 15 MIN. CALL MD IF
DISCOMFORT PERSIST. NOTE TO MD:THERE IS NO SPECIFIC ANTIDOTE.
TREATMENT OF OVEREXP SHOULD BE DIRECTED AT CONTROL OF SYMPTOMS &
CLINICAL CONDITIONS.

Fire Fighting

Flash Point:SEE SUPP DATA
Extinguishing Media:WATER FOG, FOAM, ALCOHOL FOAM, CO2 AND DRY
CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . KEEP AWAY FROM STRONG OXIDIZING AGENTS AND
TEMPERATURES IN EXCESS OF 300C.
Unusual Fire/Explosion Hazard:NONE EXPECTED.

Accidental Release

Spill Release Procedures:WEAR SUITABLE PERSONAL PROTECTIVE EQUIPMENT.
COLLECT FOR DISPOSAL. LARGER SPILLS MAY BE ABSORBED ON VERMICULITE
OR OTHER SUITABLE MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:EYE IRRITANT: AVOID EYE CONTACT. DO
NOT CUT/ WELD ON OR NEAR EMPTY DRUMS OR PAILS. DO NOT REUSE EMPTY
DRUMS OR PAILS UNLESS PROPERLY CLEANED.
Other Precautions:OBSERVE ALL REQUIREMENTS OF PLANT, COMPANY OR
GOVERNMENT REGULATIONS. KEEP OUT OF REACH OF CHILDREN.

Exposure Controls

Respiratory Protection:NONE REQUIRED IN NORMAL USE. IF PERSONNEL
EXPOSURE EXCEEDS EXPOSURE LIMITS, SELECT IN ACCORDANCE WITH 29 CFR
1910.134. NIOSH/ MSHA APPROVED RESPIRATOR EQUIPPED WITH ORGANIC
VAPOR CARTRIDGE AND DUST/ M IST PRE-FILTER RECOMMENDED.
Ventilation:GENERAL (MECH/NATL) VENT IS EXPECTED TO BE ADEQ FOR NORMAL
USE. IF PERS EXPOS EXCEEDS EXPOS LIMITS, APPLY (SUPP DATA)
Protective Gloves:BUTYL RUBBER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE BATH, SAFETY SHOWER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FL PT & FL PT METH: 270F TOC; 218F PMCC. VENT: LOCAL EXHAUST
VENTILATION AT POINTS OF VAPOR AND MIST RELEASE.

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:>450F,>232C
Melt/Freeze Pt:M.P/F.P Text:<-40F,<-40C
Vapor Pres:<0.1
Vapor Density:>1
Evaporation Rate & Reference:<0.1 (BUTYL ACETATE = 1)
Solubility in Water:100% (WT)
Appearance and Odor:CLEAR, AMBER LIQUID WITH SLIGHT AMINE ODOR.
Percent Volatiles by Volume:NIL

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:TEMPERATURES ABOVE 300C.
Hazardous Decomposition Products:BURNING CAN PRODUCE SMALL AMOUNTS OF
NOX.

Disposal

Waste Disposal Methods:INCINERATION, TREATMENT, OR LANDFILLING SHOULD
BE CARRIED OUT IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.